Eastern Plaice

By , 14 March, 2012 11:17

Picture of large herringSaturday was the day for another crack at herrings and plaice at Brighton Marina. The forecast for the day was great, the tides were great and that meant it was going to be packed to the gunnels, so to avoid any disappointment, I had to be there early.

I trotted up at around 6.30am and found myself at the head of a non-existent queue but It wasn’t too long before another hopeful turned up and was quickly followed by Fishyrob with a client and Frank, one of the wardens.

Once Frank had unlocked the gate, We headed out onto the arm and settled into our preferred bays, out as far as we could get. I setup one rod with a simple running ledger, longish hook length ending in a size two Aberdeen hook. This was baited with black lugworm tipped with thin squid strip in the search for plaice. The other rod was rigged with a string of four, size 12 Sabiki’s and a two two ounce lead for any herrings.

Picture of large herringWith the plaice rod cast out, it was time to start working the herring rod close in, where the herrings have been hugging the wall. The first one didn’t come in until about 8.30 but it was a decent sized one which would make excellent lunch. There then followed a steady stream of smaller ones but only ones and two’s. I had a brace of decent sized ones about an hour or so later which were followed by some smaller ones. By the end of the session, I had taken just over two dozen, which would make fine eating.

Picture of plaiceThe plaice rod seemed unwilling to move and I was beginning to wonder if my fishing mojo had abandoned me to remain un-plaiced (sorry) in the day’s standings. However, at about 9.30, the rod tip dipped down briefly to indicate some interest at least. I lifted the rod and felt some weight, and on reeling in, I felt the resistance of a fish. Within short time, a chunky small plaice was lifted up and over the wall. It wasn’t the biggest plaice in the world but it did mean that both targets for the day had now accomplished and it was another species ticked off the 2012 list.

Another plaice fell to my bait a couple of hours later but sadly that was it for the session and by about 4pm I’d had enough and decided to call it a day and make my was home. It’s funny but normally at this time of year, the marina would be devoid of people fishing off the walls but the mention of the excellent plaice fishing has made it busier than I can remember and it has certainly brightened up what would usually be a pretty crap time for a fishing nut.

Dave and his crew from The Tackle Box are working hard to try and get the whole of the East arm up and running after all the damage caused. Let’s just hope for continued good weather, so that this work can be completed as quickly as possible.

Hard Pressed for Herrings

By , 6 March, 2012 07:05

With 2012 well under way and not much to show for the very few sessions I’ve put in, I headed off to Brighton Marina to target plaice and herring on the East arm in a bid to increase the species count for the year. It was going to be hard going, as the East arm, after bay 26, is still out of bounds following extensive damage caused during the winter storms. While restrictions are in place, the amount of time that the arm is open during the day is seriously limited.

Tony McDonald and flounderUndeterred, I left home early on Tuesday morning and got to the Tackle Box at around 7am to stock up on bait, ready to be at the head of the queue for 9am opening. At around 8am, I saw one of the wardens, Frank and jokingly asked why he wasn’t at his post and opening the arm, to which he replied it was already open! With thoughts of a packed venue, I shot over to the arm and wandered out to find a spot. Luckily, local guide, ‘Fishyrob’ was already out there at bay 26 with his mini film crew and former international match angler, Tony McDonald. I was invited and gladly accepted the offer to slot in next to the in bay 24 and after a brief chat, I set up my gear.

Lazy way to get herringOne rod was set up with a string of mini Sabiki style lures for the herring, while the other rod had a simple running ledger baited with black lugworm on a ‘blinged’ trace (hook length adorned with brightly coloured beads and small hologram attractor blades). On this rig, I used a plain lead to the let the bait move around in search of plaice.

In a short space of time, the first herrings fell to Rob and a guy, further down from me, while I managed zero for my efforts. I worked the lures sink and draw style, letting the lead and lures bounce along off the sea bed, while Rob used the lazy method of lobbing them over the side, securing the rod with a bungee and leaving them to it. after a bit of arm aching, I decided on the same tactic and followed suit; only mine stayed herring-less.

Brace of small herringThe plaice rig also failed to nail any fish even though the same method was being employed by Rob and Tony – it later transpired that the only difference between our methods, was that I was without the fresh squid strip tipping that they were employing.

While my worms were out there not doing much, I carried on after the herring and eventually rewarded with a couple of small ones which were expertly photographed. You think that this picture is bad? You should see some with me smiling – I look like a sex offender who’s been smacked in the face with a bag of spanners. Thank you Bell’s Palsy; as if I don’t have enough problems already!

The rest of the day was pretty much fish-less for me, only managing a couple of dabs later on in the ebbing tide. For my next forays after flatties, I will make sure I have a decent bait stock to ensure I have a better chance of success. The inclusion of squid on the hooks was the way to go; as proved by Rob and Tony, who were into double figures of fish from the same patch I was fishing – well done guys, great fishing.

Quick Round Up

By , 23 February, 2012 17:28

There’s not been much to write about of late, generally only whiting and rockling fests in the dark hours and pretty much blanks in daylight. One can only write so much on whiting before it gets really – and I mean really boring. Since I wrote last, I’ve done nine sessions; four during darkness and five in daylight, all on Seaford beach, either at West View, Beachcomber or The Buckle.

The only half reasonable daylight session was Today’s which was a quick three hour bash over high water at The Buckle. Even then it was pretty dire and was only a quick test before Saturday’s Flattie competition being run from WSF forums and organised by ‘Fishyrob’. I managed to get two dabs out (one keeper) and the skinniest whiting on some minging sticky black lugworm presented on a size 4 two hook flapper. Going by that result, I reckon the competition could be bloody hard work but no doubt the hardened match men will eek out a result.

The only other thing of note to happen, is that I’ve somehow managed to contract Bell’s Palsy, so now not only do I have a completely trashed back and its continual pain but I also look like some sort of Hammer House of Horrors lab assistant. It’s no fun I can tell you, can’t close one eye, have to slurp my drinks and can’t even do that without spilling it out of my slack mouth. Eating is pretty much the same story and doesn’t make for pleasant viewing.

Don’t know how long it’s going to last; doc says, could be days, weeks or even months – oh great bells of joy! Current treatment is a shitload of anti-viral and steroid meds which are making me feel like crap.

 

Another Whiting Fest

By , 13 January, 2012 10:41

I decided on another session at Seaford beach on Wednesday evening after work and managed to be on the shingle by 9pm. Another still night, with hardly any movement to the water and a bright moon in the clear sky, indications were not leaning towards a great night. As usual, I was going to fish the flood tide up and maybe over the 12.50am high water.

Using just one rod again, I set it up with a simple size 4, two hook flapper baited with ragworm tipped off with thin squid strips and cast at varying distances through the session.

From the off, it was whiting hitting the baits almost as soon as they were in the water and nearly always a double shot when brought in. These were punctuated with the odd pout in between. One good thing though, was that I only hooked one slug (rockling) the whole time I was there.

I eventually wrapped it all up at 1.30am having caught a shed load of whiting; some were reasonable in size but in the main, it was pins. I don’t normally like wishing may time away but in fishing terms, I can’t wait for Spring and the prospect of catching other things apart from whiting.

Seaford Slump

By , 10 January, 2012 16:56

Picture of a poutSunday was my second session at Seaford beach this year and not expecting much, it was more about testing some rigs I’d made up using adjustable crimps by Breakaway  in place of my usual silicon stops or normal crimps (more on this at the end). It was also an opportunity to kickstart the season with maybe ticking some of the more common species off the list. Of course, I should have done this on my first session of the year but didn’t take any pictures as I knew that I’d already got them ticked off; but being a complete tosser, it wasn’t until later that I realised of course, that we are now in a new year and starting from scratch.

I got onto the beach at around 4pm to find it almost deserted apart from a few fishing just to the West of me. There was a South Westerly breeze blowing which chopped up the water nicely but wasn’t enough to churn it up properly. It did increase later on but to be honest, it didn’t have much of an effect on the rising tide. The plan of action was to fish the tide up and over the 11pm high water and maybe a couple of hours down. I was going to specifically target the dabs during the last of the daylight into darkness and then go general scratching with the chance of some lunch sized whiting.

I set up the one rod I was going to be using with a slightly adapted Wessex rig baited with lugworm tipped with thin squid strips on one hook and ragworm tipped with squid on the other. I did have some party squid too, which I also used to tip off the other baits or use on their own.

After half an hour, the first knock produced a small pout on the higher hook – so that was one of the list! It always amuses me to be taking photos of these ‘lesser’ species that you wouldn’t normally take notice of – but when it comes to species hunt type competitions (like the one being done on another site I frequent), if it ain’t on camera, it doesn’t count.

Picture of a dabI had a few more knocks that ended with more pout but then after about forty minutes or so, I had another repeated knocking which produced a small dab. Now this was what I was hoping for, after hearing reports of some half decent dabs coming out from here, they were worth targeting, as Anna and I are quite partial to dab dinners.

It wasn’t too long before darkness crept in and the oh so predictable whiting fest started with a double shot. These were not the plump dinner sized ones I’d been having before but the more common pins which aren’t worth keeping. Picture of two whitingIn the manner of a self conscious pervert, I made sure that no-one was watching, quickly got the camera out and as fast as you like took a quick snap before setting them free. At least now, I was almost done with this chore of having to get these embarrassing photos done – all I needed to complete the set was a slug (rockling) and that would be it.

Picture of rocklingI didn’t have to wait long, as the next retrieval brought in a double shot of a slug and a whiting, so a quick photo and the task was complete. Now, I could have done this on my last session

Anyhoo… by about 9.30, I’d really had enough of dragging undersized whiting and slugs out, so decided to pack it up. At least that was four species to tick off the list.

Breakaway adjustable crimps. Excellent things that give the best of both worlds; a secure and simple way of trapping swivels on rig bodies like a normal crimp but with the advantage of being totally adjustable like a stop knot and of being allowing precise tensioning. They are identical to a normal crimp but before being used, you push a small rubber insert into it and pull it through before cutting off the excess. You then thread onto the rig body as normal and use crimping tool to squeeze down until the desired tension is reached. These little things prevent any damage being caused by pinching on the line like a normal crimp can do. Now I’ve used them, I won’t be going back to the old normal crimps or the laborious task of using the silicon tube stops.

Theme adapted from: Panorama theme by Themocracy